PANEL DESCRIPTIONS/SPECIFICATIONS
Panels by Type

R-Panel:
        

· Exposed Fastened Metal Building Panel
·
36" Panel Coverage
· Trapezoidal Rib on 12" Centers
· 1 - 1/4" Rib Height
· Gauges: 26 GA and 24 GA Standard, 22 GA Optional
· Minimum Roof Slope: 1:12
· Applies Over Opening Framing or Solid Substrate
· Finishes: MS Colorfast 25®, PVDF, and Acrylic Coated Galvalume®

Testing:
1. Texas Windstorm Approved
2. UL 580, Class 90 Wind Uplift
3. UL 2218, Class 4 Impact Resistance
4. UL 790, Class A Fire Resistance Rating

PBR-Panel:

"PBR" Panel stands for Purlin Bearing Rib Panel. This panel is far superior to the traditional "R" panel for most roof and siding applications. This panel's secret is an extra lip on the edge that provides superior overlap between panels and seals out the elements.

U-Panel:

        


·
36" Panel Coverage
· Trapezoidal Rib on 6" Centers
· 3/4" Rib Height
· Gauges: 26 GA and 24 GA Standard, 22 GA Optional
· Minimum Roof Slope: 1:12
· Applies Over Opening Framing or Solid Substrate
· Finishes: MS Colorfast 25®, PVDF, and Acrylic Coated Galvalume®

Testing:
1. Texas Windstorm Approved
2. UL 580, Class 90 Wind Uplift
3. UL 2218, Class 4 Impact Resistance
4. UL 790, Class A Fire Resistance Rating

PBU-Panel: This structural exposed fastener panel can be used in both roof and wall conditions, and is available in the full range of 26 & 29 gauge colors, or mill finish Galvalume Plus in 29, 26 , 24, & 22 gauge high tensile steel.


PBC-Panel: This panel has the historic corrugated look, with the benefits of outstanding structural capacity due to it's deep recurring corrugations.  It is available in the full range of 29 & 26 gauge colors, or mill finish Galvalume Plus in 29, 26 , 24, & 22 gauge high tensile steel. Due to the additional material used in the corrugations, there is a slight premium in price applicable to this profile. 


PBD-Panel: This profile has similar structural characteristics to the PBC panel, at the same price.  Use this if you want a more updated look.  Although primarily used as a structural roof and vertical wall panel, it has also been used successfully on horizontal siding applications.  It is available in the full range of 29 & 26 gauge colors, or mill finish Galvalume Plus in 29, 26 , 24, & 22 gauge steel.


S-36-Panel: This bold ribbed panel looks like the PBR panel on steroids.  It's heightened profile gives it great structural characteristics, and it often used when trying to match an existing "Butler" building. It is available in the full range of 26 & 29 gauge colors, or mill finish Galvalume Plus in 29, 26 , 24, & 22 gauge high tensile steel.   


7.2-Panel: This profile is widely used on commercial carport roofs due to its excellent spanning capability, and is also used for siding applications.  It is available in the full range of 26 & 29 gauge colors, or mill finish Galvalume Plus in 29, 26 , 24, & 22 gauge high tensile steel. 


PBA-Panel: This profile is used only as a vertical siding product. Since the screws are located in the low cells, this is known as a semi-concealed fastener profile.  Available at a much less cost than the typical concealed fastener wall panels, this comes with the added benefit of adding diaphragm strength to the structure at the same time as adding looks and long-term maintenance free protection.  It is available in the full range of 26 & 29 gauge colors, or mill finish Galvalume Plus in 29, 26 , 24, & 22 gauge high tensile steel.   


BattenLok 12"Panel (16" Coverage also available): This field seamed structural standing seam roofing product is our favorite. The flat profile w/ vertical seams is easy to work with, has the smooth architectural look most desired, and has all the testing data to satisfy architects and government specifications. It is part of a system of pre-engineered components that comply with many UL test reports for wind uplift. It is available in the full range of 24 gauge colors, or mill finish Galvalume Plus in 24, & 22 gauge high tensile steel.
  

Craftsman Series Small Batten (12" or 16 ½" available): This non-structural roof panel features a narrow snap-on batten that has a high quality sealant factory installed for superior weather protection. This profile is limited to no lower than 3:12 roof slope, and must be installed over a solid substrate. It comes complete with testing reports and UL listings. It is available in the full range of 24 gauge colors and mill finish Galvalume +.
A large square batten is also available.

  

Nor-Clad® XL Panel:



Skyline Roofing® Panel:


 



.
Weatherguard Metal Construction, Inc.
Commercial . Residential . Industrial . Agricultural
5065 E. Buffalo Soldier Trail . Sierra Vista, AZ 85650
Toll-Free: (800) 678-3853 . Phone: (520) 378-3221 . Fax: (520) 378-0405
Home | About Us | Products & Services | Job Application | Portfolio | Do-It-Yourself | Resources | Contact Us

© Weatherguard Metal Construction, Inc. All Rights Reserved
Created and Maintained by Stern Internet Services Corporation
e-mail:
INFO@WGMETAL.COM
,